Mitsubishi Electric GOT2000 Series Connection Manual page 373


GOT Ethernet setting
Item Description
Set the IP address of the GOT.
GOT IP Address
(Default: 192.168.0.18)
Set the subnet mask for the sub
network. (Only for connection via
router)
Subnet Mask
If the sub network is not used, the
default value is set.
(Default: 255.255.255.0)
Set the router address of the default
gateway where the GOT is
Default
connected. (Only for connection via
Gateway
router)
(Default: 0.0.0.0)
Periphral S/W Set the GOT port No. for the S/W
Communication communication.
Port No. (Default: 5015)
Set the GOT port No. for the
Transparent
transparent function.
Port No.
(Default: 5014)

Ethernet setting
(1) Ethernet connection type: FETCH/WRITE
This section describes the Ethernet setting for the
communication driver SIEMENS S7 (Ethernet).
Range
0.0.0.0 to
255.255.255.255
Item
0.0.0.0 to
255.255.255.255
Host
Net No.
0.0.0.0 to
255.255.255.255
*1
Station
1024 to 5010,
Type
5014 to 65534
(Except for 5011,
5012, 5013, and
IP Address
49153)
1024 to 5010,
FETCH Port
5014 to 65534
No.
(Except for 5011,
5012, 5013, and
49153)
WRITE Port No.
Communication TCP (fixed)
15. CONNECTION TO SIEMENS PLC
Description
The host is displayed. (The host is
indicated with an asterisk (*).)
Set the network No. of the
connected Ethernet module.
(Default: blank)
Set the station No. of the connected
Ethernet module.
(Default: blank)
SIEMENS S7 (fixed)
Set the IP address of the connected
Ethernet module.
(Default: blank)
Set the FETCH port No. of the
connected Ethernet module.
(Default: 2000)
For the WRITE port No. of the
connected Ethernet module, the
value that the FETCH port No. is
incremented by one is set
automatically.
(Default: 2001)
*1 Each of [GOT Station] set in the communication detail setting
and [Station] set in the Ethernet setting must be set to
different station numbers.
■
Communication detail settings
15.3 Ethernet Connection
Set value
―
1 to 239
1 to 64
SIEMENS S7
(fixed)
PLC side IP
address
1024 to 65534
1025 to 65535
TCP (fixed)
15
15 - 13