Device Range That Can Be Set; Precautions - Mitsubishi Electric GOT2000 Series Connection Manual

11.6 Device Range that Can Be Set

The device ranges of controller that can be used for GOT
are as follows.
Note that the device ranges in the following tables are the
maximum values that can be set in GT Designer3.
The device specifications of controllers may differ
depending on the models, even though belonging to the
same series.
Please make the setting according to the specifications of
the controller actually used.
When a non-existent device or a device number outside
the range is set, other objects with correct device settings
may not be monitored.

Setting item
Item
Set the device name, device number, and bit number.
Device The bit number can be set only when specifying the bit of
word device.
Informati Displays the device type and setting range which are
on selected in [Device].
Set the monitor target of the set device.
Network
Station Select this item when monitoring the PLC of the
No. specified station No.

11.7 Precautions


GOT clock control
The PLC clock data cannot be written to or read from
the GOT.
The settings of "time adjusting" or "time broadcast"
made on the GOT will be disabled on the PLC.
Description
11.6.1 GE Series 90
Device name
input (I)
output (Q)
internal (M)
temporary (T)
system status (S)
system status (SA)
system status (SB)
system status (SC)
global data (G)
The bit specification of the Setting range of each word
word device
system register (R)
analog input register (AI)
analog output register (AQ) AQ0001 to AQ32640
11. CONNECTION TO GE PLC
11.6 Device Range that Can Be Set
Device
No.
Setting range
represen
tation
I00001 to I12288
Q00001 to Q12288
M00001 to M12288
T001 to T256
S001 to S128
Decimal
SA001 to SA128
SB001 to SB128
SC001 to SC128
G0001 to G7680
device
R00001 to R32640
AI0001 to AI32640 Decimal
11 - 15
11