Top Panel; Side Panel - Keysight N9923A User Manual

Preparing for Initial Use of Your New FieldFox
Take the FieldFox Tour

Top Panel

Caption Descriptions
Port 1 For CAT and NA measurements, use to make reflection measurements.
Maximum: ±50 VDC, +23 dBm RF
Ext Trig/ External reference BNC connector for use with and External Frequency
Ext Ref Reference.
Maximum: 5.5 VDC.
External Triggering is not used on the N9923A.
Port 2 For CAT and NA mode. Contains source and B/R2 receivers.
Maximum: ±50 VDC, +23 dBm RF.

Side Panel

Connector Description
Ethernet cable connector to read trace data using the FieldFox Data Link
Software and connect to the FieldFox remotely.
Download the latest version of the software at:
www.keysight.com/find/fieldfoxsupport
Reserved for future use.
30
Learn More:
"CAT Mode Settings"
on page 77
"NA Mode Settings" on
page 39
"Frequency Reference
Source" on page
"CAT Mode Settings"
on page 77
"NA Mode Settings" on
page 39
Learn More:
"LAN Settings" on
page 229
--
Keysight N9923-90001 User's Guide
226.