Top Panel - Keysight HSA N9342C Demonstration Manual

06 | Keysight | N9342C/N9343C/N9344C HSA Handheld Spectrum Analyzer - Demonstration Guide
Panel Tour (continued)

Top panel

No. Caption
1 External DC power connector
2 LED indictor (charging)
3 LED indictor
4 USB interface (device)
5 USB interface (host)
6 Headphone
7 LAN interface (option)
8 RF OUT connector
9 Probe power
10 EXT TRIG IN/REF IN (BNC,
female)
11 GPS antenna connector
12 RF IN connector (50 Ω)
12 11
1 2 3
Function
Provides input for the DC power source via an AC-DC adapter, or automotive type DC adapter
Lights (On) when the battery is charging
Lights (On) when external DC power is connected
Connects to a PC
Connects to a USB memory stick or disk
Connects to a headphone
Connects to a PC for SCPI remote control
The output for built-in tracking generator (enabled with Option TG7)
Provides power for high-impedance AC probes or other accessories (+15 V, -12 V, 150 mA maximum)
Connects to an external TTL signal or a 10-Hz reference signal. The TTL signal is used to trigger the analyzer's
internal sweep
Connects to an external GPS antenna for GPS application
Accepts an external input with a frequency range from 100 kHz to 7 GHz, tunable to 9 kHz
10 9 8
4 5 6 7