Table of Contents
Advertisement
Section 1
Top Panel Overview
Caption
1
External DC power connector
2
LED indicator (charging)
3
LED indicator
4
USB interface (device)
5
USB interface (host)
6
Headphone
7
LAN interface
8
RF OUT connector
9
EXT TRIG IN/REF IN
(BNC, female)
10
RF IN connector (50 Ω)
10
9
1
2
3
4
5
Function
Provides input for the DC power source via an AC-DC adapter or automotive type DC adapter.
Light is {On} when the battery is charging
Light is {On} when external DC power is connected to the tester
Connects the analyzer to a PC
Connects the analyzer to a USB memory stick or disk
Connects the analyzer to a headphone
Connects the analyzer to a PC for SCPI remote control
The output for the built-in tracking generator. Enabled with Option TG3.
Connects to an external TTL signal or a 10 MHz refer ence signal. The TTL signal is used to
trigger the analyzer's internal sweep.
Accepts an external input with a frequency range from 100 kHz to 3 GHz, tunable to 9 kHz
4
8
6
7
Advertisement
Table of Contents
