•
Added option to specify port range in Port Forwarding configuration. [Table 11: UCM6510 Network
SettingsPort Forwarding]
•
Added ability to go back to IVR menu from Dial By Name by pressing the star key. [Dial By Name
Configuration]
•
Added support to upgrade SIP end device via SD card in Zero Config. [Table 28: Global Policy
Parameters – Maintenance]
•
Added ability to filter alert logs. [Alert Log]
•
Added ability to delete alert logs. [Alert Log]
•
Added NAT option for peer trunk. [Table 68: Outbound Route Configuration Parameters]
•
Improved Automatic Download CDR result format. [CDR]
•
Fixed Digital Trunk SS7 signaling mode inbound / outbound call problem.
•
Fixed Asterisk is crashed while using external MCB and CEI.
Firmware Version 1.0.1.12
•
Added Active Calls feature to monitor call status and barge in active calls.
•
Added support to disable the trunk for VoIP trunk and analog trunk. [Table 61: Create New SIP Trunk]
[Table 50: Analog Trunk Configuration Parameters]
•
Added RBS support on T1.
•
Added Frame Relay support on Data Trunk. [DATA TRUNK]
•
Added 'Assign CIC to D-channel' option on SS7 settings page. [Table 54: Digital Hardware
Configuration Parameters: E1 - SS7]
•
Added 'First CIC' option in SS7 configuration. [Table 54: Digital Hardware Configuration Parameters:
E1 - SS7]
•
Added 'D-Chan' selection for PRI and SS7 in editing digital ports. [Table 53: Digital Hardware
Configuration Parameters: E1 – PRI_NET/PRI_CPE] [Table 54: Digital Hardware Configuration
Parameters: E1 - SS7]
•
Added support for Ring simultaneously feature for extensions. [Table 33: SIP Extension Configuration
Parameters]
•
Added support for Music On Hold selection per extension. [Table 33: SIP Extension Configuration
Parameters]
•
Added support to disable this extension per extension. [Table 33: SIP Extension Configuration
Parameters]
•
Added ability to set personal password for making outbound calls per extension. [Table 33: SIP
Extension Configuration Parameters]
•
Added 'TEL URI' configuration for SIP extension/VoIP trunk. [Table 33: SIP Extension Configuration
Parameters] [Table 61: Create New SIP Trunk]
•
Added E&M Immediate and E&M Wink signaling for T1. [Table 58: Digital Hardware Configuration
Parameters: T1-E&M Immediate/E&M Wink]
•
Renamed the 'network backup' settings items to 'data sync'. [Data Sync]
•
Added "Download Search Result" in CDR. [CDR]
UCM6510 IP PBX User Manual
P a g e
|
29