Firmware Version 1.0.8.12 - Grandstream Networks UCM6100 Series User Manual


Added option to specify port range in Port Forwarding configuration. [Table 14: UCM6102 Network
Settings->Port Forwarding]

Added ability to go back to IVR menu from Dial By Name by pressing the star key. [DIAL BY NAME
CONFIGURATION]

Added support to upgrade SIP end device via SD card in Zero Config. [Table 29: Global Policy
Parameters->Maintenance]

Added ability to filter alert logs. [ALERT LOG]

Added ability to delete alert logs. [ALERT LOG]

Added NAT option for peer trunk. [Table 52: SIP Peer Trunk Configuration Parameters]

Improved Automatic Download CDR result format. [CDR]

FIRMWARE VERSION 1.0.8.12


Added recording files store management. [RECORDINGS STORAGE]

Added AMI access (restricted). [ASTERISK MANAGER INTERFACE (RESTRICTED ACCESS)]

Added LDAP Phonebook Import/Export support. [LDAP PHONEBOOK]

Added Callback feature. [CALLBACK FEATURE]

Added Busy Camp-on (Call Completion) feature. [BUSY CAMP-ON]

Added external number
Parameters->Features]

Added end point firmware management support to allow end point device to upgrade via UCM6100
local storage or USB media. [Table 29: Global Policy Parameters->Maintenance]

Added link to access phone web GUI in Zero Config. [MANAGE DEVICES]

Added model update support to download model templates for surveillance and GSWave. [MODEL
UPDATE]

Added filter for searching in Alert Log. [ALERT LOG]

Added DAHDI Out Line Selection. [Table 48: Analog Trunk Configuration Parameters]

Added automatic CDR download. [CDR]

Added multi-user management and concurrent user login support. [USER MANAGEMENT]

Added operation log. [OPERATION LOG]

Added option to specify web access session timer. [LOGIN TIMEOUT SETTINGS]

Added call monitor/barge-in support. [ACTIVE CALLS AND MONITOR]

Added GSwave QR code support. [EMAIL TO USER]

Added ability to add customized Pvalue on Model Template. [MODEL TEMPLATES]

Updated maximum length of web UI login password to 30 characters. [CHANGE PASSWORD]

Added Fax gateway support for Fax mode on FXS and FXO port. [Table 43: FXS Extension
Configuration Parameters->Media] [Table 48: Analog Trunk Configuration Parameters]

Added "NAT" option and "Send PPI Header" option in SIP register trunk configuration. [Table 51: SIP
Register Trunk Configuration Parameters]

Added REC API (access for call recording files). [API CONFIGURATION]

Added "Synchronize All Data" option in Data Sync. [DATA SYNC]
Firmware Version 1.0.10.39
calling via extension.
UCM6100 Series IP PBX User Manual
[Table 36: SIP Extension Configuration
Page 21 of 331