Ha Configuration Parameters; Table 2: Ha Related Parameters - Grandstream Networks UCM6300 Series High Availability User Manual

HA CONFIGURATION PARAMETERS

Settings Description
High Available
Enable or disable HA.
Enable
Force to switch the roles of
Force Switch active UCM and standby
UCM.
HA Station Configure the HA station
Type type for the UCM.
This is the IP address for
HA Cluster IP
the active UCM in service.
This is the IP address of
HA Peer IP
the peer UCM in HA setup.
This is the MAC address
HA Peer MAC
of the peer UCM in HA
Address
setup.
This is the port used for
communication between
Heartbeat Port
the two UCM via heartbeat
port.

Table 2: HA Related Parameters

Value
Range
Yes/No
NA
Primary
Secondary
NA
NA
NA
0 - 65535
UCM6300 Series/UCM6300 Audio Series:
High Availability User Guide
Default
Notes
Value
No
Caution: Please do not use this
function unless necessary (e.g.,
NA
it can be used during firmware
upgrading).
In HA setup, one UCM must be
NA primary and the other one must
be secondary.
This IP address is shared by the
primary and secondary UCM.
The UCM in active status
providing PBX service will
NA always be using this IP address
regardless it's the primary or
\secondary UCM. This IP
address can only be used for the
active UCM.
This is the static IP address of
NA the peer UCM in HA setup
connected via heartbeat port.
This is the MAC address of the
NA peer UCM in HA setup
connected via heartbeat port.
It is recommended to use default
9527
port.
P a g e | 15