Modifying Interface Parameters - Alcatel-Lucent 7710 SR OS Configuration Manual

Modifying Interface Parameters

Starting at the
To modify an IP address, perform the following steps:
Example
To modify a port, perform the following steps:
Example
The following example displays the interface configuration:
A:ALA-A>config>router# info
#------------------------------------------
# IP Configuration
#------------------------------------------
#------------------------------------------
A:ALA-A>config>router#
Page 88
config>router
:
A:ALA-A>config>router# interface "to-sr1"
A:ALA-A>config>router>if# shutdown
A:ALA-A>config>router>if# no address
A:ALA-A>config>router>if# address 10.0.0.25/24
A:ALA-A>config>router>if# no shutdown
:
A:ALA-A>config>router# interface "to-sr1"
A:ALA-A>config>router>if# shutdown
A:ALA-A>config>router>if# no port
A:ALA-A>config>router>if# port 1/1/2
A:ALA-A>config>router>if# no shutdown
interface "system"
address 10.0.0.103/32
exit
interface "to-sr1"
address 10.0.0.25/24
port 1/1/2
exit
router-id 10.10.0.3
level, navigate down to the router interface context.
7710 SR OS Router Configuration Guide