Mr Configurator2 - Mitsubishi Electric MELSERVO-J4 series Instruction Manual

11. Options and peripheral devices
(3) Dimensions of junction terminal block

11.7 MR Configurator2

MR Configurator2 (SW1DNC-MRC2-E) uses the communication function of the servo amplifier to perform
parameter setting changes, graph display, test operation, etc. on a personal computer.
11.7.1 Specifications
Item
Project
Parameter
Monitor
Diagnosis
Test operation
Adjustment
Others
Note 1. This is available only in the standard control mode. This will be available in the fully closed loop control mode,
linear servo motor control mode, and DD motor control mode in the future.
2. This is available only in the fully closed loop control mode.
3. This is available only in the linear servo motor control mode.
4. This is available in the standard control mode, fully closed loop control mode, and DD motor control mode.
7.62
φ4.5
TB.E (φ6)
M3 × 5L
6.2
POINT
The MR-J4-_B_-RJ servo amplifier is supported with software version 1.19V or
later.
Create/read/save/delete project, system setting, and print
Parameter setting
Display all, I/O monitor, graph, and ABS data display
Alarm display, alarm onset data, drive recorder, no motor rotation, system configuration, life
diagnosis, machine diagnosis, fully closed loop diagnosis (Note 2), and linear diagnosis (Note 3)
JOG operation (Note 4), positioning operation, motor-less operation (Note 1), DO forced output,
and program operation
One-touch tuning, tuning, and machine analyzer
Servo assistant, parameter setting range update, machine unit conversion setting, and help
display
63
54
44.11
1.42
M3 × 6L
Description
11 - 49
[Unit: mm]