Battery - Mitsubishi Electric MELSERVO-J4 series Instruction Manual

11. Options and peripheral devices

11.8 Battery

This battery is used to construct an absolute position detection system. Refer to chapter 12 for details.
11.8.1 MR-BAT6V1SET battery
(1) Parts identification
(2) Year and month of manufacture of battery
The year and month of manufacture of MR-BAT6V1 battery have been described to the rating plate put
on a MR-BAT6V1 battery built-in MR-BAT6V1SET battery.
11.8.2 MR-BAT6V1BJ battery for junction battery cable
(1) Parts identification
(2) Year and month of manufacture of battery
Production year and month are indicated in a serial number (SERIAL) on the rating plate. The second
digit from left in the number indicates the first digit of the dominical year, The third digit from left indicates
a month (Oct: X, Nov: Y, Dec.: Z). For November 2013, the serial is like, "SERIAL: _ 3Y _ _ _ _ _ _".
POINT
Refer to appendix 2 and 3 for battery transportation and the new EU Battery
Directive.
The MR-BAT6V1BJ battery for junction battery cable is only for the HG series
servo motors. It cannot be used with direct drive motors.
Do not use the MR-BAT6V1BJ battery for junction battery cable in the fully
closed loop system and scale measurement function.
Connector for servo amplifier
Rating plate
Orange: Connector for servo amplifier
Black: Connector for branch cable
2CR17335A WK17
11-04
6V 1650mAh
Case
11 - 52
Case
The year and month of manufacture