Mitsubishi Electric MELSERVO-J4 series Instruction Manual page 485

Servo amplifier mr-j4-_b(-rj) mr-j4-_b4(-rj) mr-j4-_b1(-rj)

Hide thumbs Also See for MELSERVO-J4 series:

Table of Contents

17. APPLICATION OF FUNCTIONS

(2) Changing the mode to "J3 compatibility mode" by using the application "MR-J4(W)-B mode selection".

You can switch the servo amplifier's mode to "J3 compatibility mode" beforehand with the built-in

application software "MR-J4(W)-B mode selection" of MR Configurator2. Use it for a solution when it is

difficult to reset many times with your "Reset required" controller such as "QD74MH_".

The application "MR-J4(W)-B mode selection" has no expiration date.

Select "Change Mode".

Select "J3 Compatibility Mode".

Select "Operation Mode" for each axis.

Show Quick Links

Table of Contents

Troubleshooting