Mitsubishi Electric MELSERVO-J4 series Instruction Manual page 502

APPENDIX
Note 1. Coat the crimping part with an insulation tube.
2) 400 V class
Servo amplifier
MR-J4-60_4/MR-J4-100_4
MR-J4-200_4
MR-J4-350_4
MR-J4-500_4 (Note 1)
MR-J4-700_4 (Note 1)
MR-J4-11K_4 (Note 1)
MR-J4-15K_4 (Note 1)
MR-J4-22K_4 (Note 1)
Note 1. To connect these models to a terminal block, be sure to use the screws that come with the terminal block.
2. Alphabets in the table indicate crimping tools. Refer to the following table for the crimp terminals and crimping tools.
3. Select wire sizes depending on the rated output of the servo motors. The values in the table are sizes based on rated output of
the servo amplifiers.
Note. Some crimp terminals may not be mounted depending on the size. Make sure to use the
Symbol
Crimp terminal
(Note 2)
a FVD5.5-4
b (Note 1) 8-4NS
c FVD2-4
d FVD14-6
e FVD5.5-6
f FVD22-6
g FVD38-6
h R60-8
i FVD5.5-8
j CB70-S8
2. Some crimp terminals may not be mounted depending on the size. Make sure to use the
recommended ones or equivalent ones.
Table: Recommended crimp terminals
Symbol
Crimp terminal
(Note)
a FVD5.5-4
b FVD2-4
c FVD14-6
d FVD5.5-6
e FVD2-6
f FVD8-6
g FVD14-8
h FVD5.5-8
i FVD22-8
recommended ones or equivalent ones.
Table: Recommended crimp terminals
Servo amplifier-side crimp terminals
Applicable tool
Body Head
YNT-1210S
YHT-8S
YNT-1614
YF-1 YNE-38
YNT-1210S
YF-1 YNE-38
YF-1 YNE-38
YF-1 YET-60-1
YNT-1210S
YF-1 YET-150-1
Wire [AWG] (Note 2)
L1/L2/L3
L11/L21
14/14 14/14
14: b/14: b
12: a/12: a
10: d/10: d 14: b/14: b
8: f/8: f
6: g/4: g
Servo amplifier-side crimp terminals
Applicable tool
Body Head
YNT-1210S
YNT-1614
YF-1 YNE-38
YNT-1210S
YNT-1614
YF-1 YNE-38
YF-1 YNE-38
YNT-1210S
YF-1 YNE-38
App. - 5
Manufacturer
Dice
DH-122
DH-112
DH-123
JST
DH-113
DH-124
DH-114
TD-125
TD-113
TD-226
TD-213
U/V/W/
P+/C
(Note 3)
14/14 14/14
12: a/10: a
14: b/14: b
10: a/10: a
14: e/14: e 8: f/8: f
12: d/12: d 6: c/4: c
12: h/12: h 6: i/4: i
Manufacturer
Dice
DH-122/DH-112
JST
DH-121/DH-111
DH-122/DH-112
DH-123/DH-113