Mitsubishi Electric MELSERVO-J4 series Instruction Manual page 401

14. USING A LINEAR SERVO MOTOR
CAUTION
This chapter does not describe the following items. For details of the items, refer to each section of the
detailed description field.
Connecting a linear servo motor for different axis to the U, V, W, or CN2 may
cause a malfunction.
Do not modify the equipment.
The cables such as power wires deriving from the primary side cannot stand the
long-term bending action. Avoid the bending action by fixing the cables to the
moving part, etc. Also, use the cable that stands the long-term bending action for
the wiring to the servo amplifier.
Input power supply circuit
Explanation of power supply system
Signal (device) explanations
Alarm occurrence timing chart
Interfaces
SSCNET III cable connection
Grounding
Switch setting and display of the servo
amplifier
Item
Section 3.1
Section 3.3
Section 3.5
Section 3.7
Section 3.8
Section 3.9
Section 3.11
Section 4.3
14 - 6
Detailed explanations