Mixer Switch - GRAUPNER mz-24 Pro Programming Manual

• Offset X
A value unequal to "000%" entered in the "Offset
X" line causes the offset to shift horizontally by a
maximum of ±100%.
To move the offset point 30% to the right (for ex-
ample), touch the value field to the right of "OFF-
SET X":
BACK PHASE 1 Prog.MIX
CH 1 >> CH 3 TRIM ON
ACT ON CTL ON
A +050% B +125%
OFFSET X 000%
OFFSET Y 000%
Touch
SYM OFF
The color of the field switches from black to blue:
BACK PHASE 1 Prog.MIX
>>
CH 1 CH 3 TRIM ON
ACT ON CTL ON
A +050% B +125%
OFFSET X 000%
OFFSET Y 000%
SYM OFF
Use the + button to move the offset point, with-
in the actually set mixer end point, the aforemen-
tioned 30% to the right:
BACK
PHASE 1 Prog.MIX
>>
CH 1 CH 3 TRIM ON
ACT ON CTL ON
A +050% B +125%
OFFSET X +030%
OFFSET Y 000%
SYM OFF
138 Function menu | general - Free mixer
RES
Touch the
the blue (and hence active) field to the default val-
ue.
• Offset Y
A value unequal to "000%" entered in the "Offset
Y" line in contrast causes the characteristic of the
mixer to shift vertically by a maximum of ±100%.
To move the previously mentioned as example off-
SERVO
set point 30% to the right, always for example also
50% to the bottom, tap on the value field on the
right, near the "OFFSET Y":
INC
RES
BACK
DEC
CH 1
SERVO
The color of the field switches from black to blue:
INC
RES
BACK
DEC
CH 1
SERVO
-
Use the button to move the offset the aforemen-
tioned 50% down:
INC
RES
DEC
button to reset a changed value in
SERVO
PHASE 1 Prog.MIX
>> CH 3 TRIM ON
ACT ON CTL ON
A +050% B +125% INC
Touch
OFFSET X +030% RES
DEC
OFFSET Y 000%
SYM OFF
PHASE 1 Prog.MIX SERVO
>> CH 3 TRIM ON
ACT ON CTL ON
INC
A +050% B +125%
OFFSET X +030% RES
DEC
OFFSET Y 000%
SYM OFF
BACK
PHASE 1 Prog.MIX
>>
CH 1 CH 3 TRIM ON
ACT ON CTL ON
A +050% B +125%
OFFSET X +030%
OFFSET Y –050%
SYM OFF
Touch the RES button to reset a changed value in
the blue (and hence active) field to the default val-
ue.
Attention
The curve shown here is only for demonstra-
tion purposes and does not represent an ac-
tual mixer guide line.

Mixer switch

Once a mixer is activated, as described in the
ing and deactivating mixers" section, the value fields
to the right of "ACT" and "Ctrl/sw" are also
activates the relevant mixer and turns it permanently
on in the current phase.
Independent of other factors, each mixer can, howev-
er, be turned on and off by assigning it its own switch.
On the right next to "Ctrl/sw", touch the value field ...
BACK
PHASE 1 Prog.MIX
Touch
>>
CH 1 CH 3 TRIM ON
ACT ON CTL ON
A +050% B +125%
OFFSET X +030%
OFFSET Y –050%
SYM OFF
SERVO
INC
RES
DEC
"Activat-
ON
. This
SERVO
INC
RES
DEC