Free Mixer - GRAUPNER mz-24 Pro Programming Manual

Free mixers
free programmable linear and curve mixers
In the basic transmitter display, use your finger or the
provided stylus to touch the gear icon labeled "F":
Touch
The display switches to the blue function menu. Touch
the menu item "Prog.MIX":
Touch
Independent of the selected model type, there are five
linear mixers and three 7-point curve mixers in each
of the 30 model memories per set-up phase.
Phase-dependent settings of free mixers
The here mentioned sub-menu offers the possibility
to program phase specific free mixers. Recognizable
on the top left side of the display in green color is dis-
played the phase name. As standard is displayed the
name of the phase 1, which is indicated by the name
"NORMAL" or "PHASE 1". As soon as you will have
defined one or many other phases in the "PHASE"
menu, you will be able to switch among those phases.
Activate the corresponding switch or switches if de-
sired to switch between the phases.
134 Function menu | general - Free mixer
Page change
NEXT
Press the button at the top right edge of the
display to switch the rotation procedure in the selec-
tion page between linear mixer 1 ... 5 to the selection
page of the curve mixer 6 ... 8 etc... :
Setting up mixers
Switch to the desired phase.
In the line of the mixer to set up tap on one of the two
buttons labeled with NONE, for example:
Touch
The selection page "MST >> SLV" of the selected
mixer appears in the display:
• "MST"
In this display, touch the left of the two top red but-
Touch
tons:
Touch
The button color changes from black to blue:
Select one of the
ping on it, for example:
Control functions 1 ... 12 by tap-