V-Tail; Adjusting The Actuation Of A V-Tail - GRAUPNER mz-24 Pro Programming Manual

V-Tail

Adjusting the actuation of a V-tail

This sub-menu only appears when a V-Tail has been se-
lected in the basic settings of the model.
In the basic transmitter display, use your fi nger or the
provided stylus to touch the gear icon labeled "F":
000%
000:00.0
000 000
mz
000:00.0
0:01:23
Touch
M - 2
000 000
PHASE 1
Extra 360
BATT TIME 00: 01: 23
000
The display switches to the blue function menu. Touch
the menu item "V-Tail".
BACK BASE FUNCTION
Phase D/R,EXPO THR.CRV Idle LOW
Snap roll Aile diff Wing MIX Flap MIX
Airbrake TTrainer Logical sw Sequence
The elevator and rudder are controlled by two sepa-
rately-articulated rudders arranged in a V-shape. The
coupling function for the rudder and elevator control
is automatically transferred from the program.
Phase-dependent settings
The here mentioned sub-menu offers the possibility
of phase specifi c settings. Recognizable on the top
left side of the display in green color is displayed the
phase name. As standard is displayed the name of the
phase 1, which is indicated by the name "NORMAL"
or "PHASE 1". As soon as you will have defi ned one
or many other phases in the "PHASE" menu, you will
be able to switch among those phases.
206 Function menu | Airplane model - V-tail
Activate the corresponding switch or switches if de-
sired to switch between the phases.
000%
4.2V
Programming
Touch the corresponding value fi eld with the value to
000
be changed, for example:
SYSTEM
Prog.MIX
Touch
Flap set
The color of the value fi eld switches from black to
V-Tail
blue:
In the active (blue) value fi eld, press
current value
SERVO
BACK PHASE 1 V-Tail
ELEVATOR RUDDER
A B A B INC
+100% +100% +100% +100% RES
DEC
BACK PHASE 1 V-Tail SERVO
ELEVATOR RUDDER
INC
A B A B
+100% +100% +100% +100% RES
DEC
Touch
BACK PHASE 1 V-Tail SERVO
ELEVATOR RUDDER
INC
A B A B
+100% +100% +100% +100% RES
DEC
+
to increase the
–
to reduce it, for example:
BACK PHASE 1 V-Tail
ELEVATOR RUDDER
A B A B
+075% +100% +100% +100%
Use the same procedure with the values in the other
value fi elds.
Touch the RES button to reset a changed value in the
blue (and hence active) fi eld to the default value.
Notice
Remember that the mixing travel of the mixers is
cumulative with simultaneous control stick move-
ment, and one servo or both servos may me-
chanically collide. To prevent this, reduce the related set
mixing values if necessary.
After you have fi nished making your settings, touch
the BACK button at the top left of the display to return
to the menu selection:
BACK BASE FUNCTION
Phase D/R,EXPO THR.CRV Idle LOW
Wing MIX
Snap roll Aile diff Flap MIX
Airbrake TTrainer Logical sw Sequence
SERVO
INC
RES
DEC
SYSTEM
Prog.MIX
Flap set
V-Tail