"Pos" Line; "Set" Line - GRAUPNER mz-24 Pro Programming Manual

+
Set the desired value with the or
right edge, for example:
BACK PHASE 1 Trim Step
SE T1 T2 T3 T4
STEP 04 02 04
POS 00% 00%
00% 00%
SET 000% 000% 000% 000%
D.TRIM 1 NONE AUTO TRIM INH
D.TRIM 2 NONE CTL ON
Touch the RES button to reset a changed value in the
blue (and hence active) field to the default value.
Use the same procedure with the other trim controls.
Tip
The numbering of the trim controls T1 ... T4 refers ex-
clusively to the assignment of control channels 1 ... 4.
Whether a specific name relates to a trim control of the
left and right control stick depends on the control mode
selected in the "ST mode" sub-menu of the system
menu.

"POS" line

The current trimming positions are shown in the
"POS" column. (The trimming range is about ±30 %
of the entire control path.) They can appear as follows
for example:
BACK PHASE 1
Trim Step
SE T1 T2 T3 T4
STEP 04 02 04
POS 00% +13% –06% –07%
SET 000% 000% 000% 000%
D.TRIM 1 NONE AUTOTRIM INH
D.TRIM 2 NONE CTL ON
–

"SET" line

button at the
This option allows you to optionally save the current
position of the four digital trimmings so that they can
SERVO
be returned to the visual middle position. After a mod-
VIEW
el memory is changed or after long periods between
INC
04
flights, the last safe trimming positions are available
RES
in the middle positions of the respective trimming dis-
DEC
play of the control functions 1 ... 4.
SET
Say for example you have landed your model
and trimmed it. The current trimming positions are
displayed white in the "POS" line approximately in the
middle of the display. (The trimming range is approx-
imately ±30 % of the overall control path.) The value
fields in the "SET" line underneath display the saved
trimming and, since no values have yet been saved,
the value fields all contain 000%. The display there-
fore appears e.g. as above in the section "POS" line.
To save a trimming value, touch the value field below
the trimming value to be transferred, such as the val-
ue field in column "T3" (elevator in case of fixed wing
model):
(trimming position)
SERVO
VIEW
The color of the field switches from black to blue:
04 INC
RES
DEC
SET
(saving trimming positions)
BACK PHASE 1 Trim Step SERVO
SE T1 T2 T3 T4 VIEW
INC
STEP 04 02 04 04
POS 00% +13% –06% –07% RES
SET 000% 000% 000% 000% DEC
D.TRIM 1 NONE AUTOTRIM INH SET
Touch
D.TRIM 2 NONE CTL ON
BACK PHASE 1 Trim Step
SE T1 T2 T3 T4
STEP 04 02 04 04
POS 00% +13% –06% –07%
SET 000% 000% 000% 000%
D.TRIM 1 NONE AUTO TRIM INH
D.TRIM 2 NONE CTL ON
Touch the SET button at the bottom right of the dis-
play ...
BACK PHASE 1 Trim Step
SE T1 T2 T3 T4
STEP 04 02 04 04
POS 00% +13% –06% –07%
SET 000% 000% 000% 000%
D.TRIM 1 NONE AUTO TRIM INH
D.TRIM 2 NONE CTL ON
... to transfer the trimming value from the "POS" line
into the separate trimming memory:
BACK
PHASE 1 Trim Step
SE T1 T2 T3
STEP 04 02 04
POS 00% +13% 00% –07%
000% 000% –006% 000%
SET
D.TRIM 1 NONE AUTO TRIM INH
D.TRIM 2 NONE CTL ON
Use the same procedure for other trimming values.
Base menu - Trim setting
SERVO
VIEW
INC
RES
DEC
SET
SERVO
VIEW
INC
RES
Touch
DEC
SET
SERVO
T4 VIEW
04 INC
RES
DEC
SET
83