Idle Low; Setting A Stable Idle - GRAUPNER mz-24 Pro Programming Manual

Idle LOW

Setting a stable idle

This sub-menu is hidden when selecting electric motor
in the basic settings of the model memory.
In the basic transmitter display, use your fi nger or the
provided stylus to touch the gear icon labeled "F":
000%
000:00.0
000 000
mz
000:00.0
0:01:23
Touch
M - 2
000 000
PHASE 1
Extra 360
BATT TIME 00: 01: 23
000
The display switches to the blue function menu. Touch
the menu item "Idle LOW".
BACK BASE FUNCTION
Phase D/R,EXPO THR.CRV Idle LOW
Touch
Snap roll Aile diff Wing MIX Flap MIX
Airbrake TTrainer Logical sw Sequence
Normally, the idle of a gas motor is set using the digi-
tal trim control for the throttle. This idle position of the
throttle servo (which depends on the position of the
trim control) can be adjusted as necessary to a higher
or lower idle with a switch to a value that can be set in
this sub-menu within a range of ± 20%.
180 Function menu | Airplane models - Idle
000%
4.2V
Programming
In the "ACT" line, activate or deactivate the "Idle
LOW" option by touching the associated button with
a fi nger or the provided stylus, for example:
000
SYSTEM
Prog.MIX
Flap set
In the "Ctrl/sw" line, assign a control for adding or re-
moving the corrective value to be set in the line "SET"
V-Tail
as described in the section
signment, such as:
In the "SET" line, set the desired corrective value by
touching the associated value fi eld:
BACK PHASE 1 Idle LOW SERVO
INC
ACT INH
CTL ON RES

DEC
SET 000%
BACK SERVO
PHASE 1 Idle LOW
INC
ACT ON
CTL ON RES

SET 000% DEC
Control and switch as-
BACK PHASE 1 Idle LOW SERVO
INC
ACT ON
CTL SW 3 RES

DEC
SET 000%
BACK PHASE 1 Idle LOW
ACT ON
Touch
CTL SW 3

SET 000%
The color of the fi eld switches from black to blue:
BACK PHASE 1 Idle LOW
ACT ON
CTL SW 3

SET 000%
Set the desired value with the + or
right edge.
The adjustment range is ±100%. A value of +100%
moves the idle position of the throttle servo set with
the throttle trim 20% toward Idle LOW, and vice versa.
Touch the RES button to reset a changed value in the
blue (and hence active) fi eld to the default value.
After you have fi nished making your settings, touch
the BACK button at the top left of the display to return
to the menu selection.
SERVO
INC
RES
DEC
SERVO
INC
RES
DEC
– button at the