"Point" Column; "Phase" Column - GRAUPNER mz-24 Pro Programming Manual

WIZ.
CTL MIXER POINT PHASE
SL 1 NULL NULL 1
NULL NULL NULL 1
INC
NULL NULL NULL 1
RES
NULL NULL NULL 1
DEC
NULL NULL NULL 1
NULL NULL NULL 1
Select the desired mixer in the actually blue,
then active, value field by tapping on the
or – button which are located on the right
side of the display, for example:
WIZ.
CTL MIXER POINT PHASE
SL 1 Thr.CRV NULL 1
NULL NULL NULL 1
INC
NULL NULL NULL 1
RES
NULL NULL NULL 1
DEC
NULL NULL NULL 1
NULL NULL NULL 1
RES
Touch the button to reset a changed
value in a blue (active) value field to the de-
fault value.

• "POINT" column

You have selected one or more mixers in the
lines of the "Mixer" column. In the "POINT"
column, specify the support point(s) to be
trimmed.
To select a point, touch the button in the
"POINT" column in the desired line with a
finger or the provided stylus, for example:
WIZ.
CTL MIXER POINT PHASE
SL 1 Thr.CRV
NULL NULL
NULL NULL
NULL NULL
NULL NULL
NULL NULL
Select the desired point L, 1 ... 5 or H in the
+ actually blue, then active, value field by tap-
ping on the + or –
ed on the right side of the display, for ex-
ample:
WIZ.
CTL MIXER POINT PHASE
SL 1 Thr.CRV
NULL
NULL
NULL NULL
NULL NULL
NULL NULL
NULL NULL
RES
Touch the button to reset a changed
value in a blue (active) value field to the de-
fault value.
Notice
The associated controller does not
have any effect if an undefined point is
selected (in the basic version of the rel-
evant curve mixers, only the points "L" and
"H" are set).
NULL 1
NULL 1
INC
NULL 1
RES
NULL 1
DEC
NULL 1
NULL 1
button which are locat-
3 1
NULL
1
INC
NULL 1
RES
NULL 1
DEC
NULL 1
NULL 1

• "PHASE" column

If you want to, specify in the right "PHASE"
column the programmed phases in which
the governor should be active. In the value
field, in the example, "1 (normal)", the num-
ber refers to the phase number that can be
found in the sub-menu "PHASE".
To select another phase than default
Phase1, touch the button in the "Phase"
column in the desired line with a finger or
the provided stylus, for example:
WIZ.
CTL MIXER POINT PHASE
SL 1 Thr.CRV 3 1
NULL NULL NULL 1
INC
NULL NULL NULL 1
RES
NULL NULL NULL 1
DEC
NULL NULL NULL 1
NULL NULL NULL 1
You can change the current Phase number
in the blue (active) value field by touching
+ –
the or buttons at the right edge of the
display the desired number of times, for ex-
ample:
WIZ.
CTL MIXER POINT PHASE
SL 1 Thr.CRV 3 3
NULL NULL NULL 1
INC
NULL NULL NULL 1
RES
NULL
NULL NULL 1
DEC
NULL NULL NULL 1
NULL NULL NULL 1
Touch the RES button to reset a changed
value in a blue (active) value field to the de-
fault value.
Base menu - Model selection 51