GRAUPNER mz-24 Pro Programming Manual page 157

BACK
CTL MIXER POINT PHASE
NONE NONE L 1
NONE NONE L 1
NONE NONE L 1
NONE NONE L 1
NONE NONE L 1
NONE NONE L 1
Basic operating steps
• "CTL" column
In the first column of the menu with the heading
"Control", select a control that appears suitable for
this purpose from the controls offered by your mz-
24 HoTT Pro transmitter.
In order to assign a control, touch the button in this
column and the desired line, for example:
BACK
CTL MIXER POINT PHASE
NONE NONE L
NONE NONE L
Touch
NONE NONE L
NONE NONE L
NONE NONE L
NONE NONE L
The following appears in the display:
BACK
CTL MIXER POINT PHASE
NONE NONE L
Select
NONE NONE KEIN
NO
NONE NONE KEIN
CLR
NONE NONE KEIN
NONE NONE L
NONE NONE L
Then press the desired control such as the right
proportional rotary control SL1:
SERVO
INC
RES
DEC
• "MIXER" column
In the six value fields of the second column with
the header "MIXER", you can select individual he-
licopter mixers, or one of the two available mixers
in any combination.
To select a mixer, touch the button in the "MIXER"
column in the desired line, for example:
SERVO
1
1
INC
1
RES
1
DEC
1
You can change the current value in the blue (ac-
1
tive) value field by touching the
the right edge of the display, for example:
SERVO
1
1
INC
1
RES
1
DEC
1
1
BACK SERVO
CTL MIXER POINT PHASE
SL 1 NONE NONE L
NONE NONE NONE L
INC
NONE NONE NONE L
RES
NONE NONE NONE L
DEC
NONE NONE NONE L
NONE NONE NONE L
BACK SERVO
CTL MIXER POINT PHASE
SL 1 NULL NULL 1
NULL NULL NULL 1
INC
NULL NULL NULL 1
RES
NULL NULL NULL 1
DEC
NULL NULL NULL 1
NULL NULL NULL 1
+ or – buttons at
BACK SERVO
MIXER
CTL POINT PHASE
SL 1 THR.CRV NULL 1
NULL NULL NULL 1
INC
NULL NULL NULL 1
RES
NULL NULL NULL 1
DEC
1
NULL NULL NULL
NULL NULL NULL 1
RES
Touch the button to reset a changed value in
a blue (active) value field to the default value.
• "POINT" column
In the lines in the "MIXER" column, you have se-
lected one or more mixers. In the "POINT" column,
specify the support point(s) of the related mixer to
be trimmed.
To select a point, touch the button in the "POINT"
column in the desired line, for example:
BACK
CTL MIXER POINT PHASE
SL 1 THR.CRV NULL
NULL NULL NULL
NULL NULL NULL
NULL NULL NULL
NULL NULL NULL
NULL NULL NULL
You can change the current value in the blue (ac-
tive) value field by touching the
the right edge of the display the desired number of
times, for example:
BACK
CTL MIXER POINT PHASE
SL 1 THR.CRV 3
NULL NULL NULL
NULL NULL NULL
NULL NULL NULL
NULL NULL NULL
NULL NULL NULL
RES
Touch the button to reset a changed value in
a blue (active) value field to the default value.
Function menu | Helicopter model - Pitch curve
SERVO
1
1
INC
1
RES
1
DEC
1
1
+ or – buttons at
SERVO
1
1
INC
1
RES
1
DEC
1
1
157