GRAUPNER mz-24 Pro Programming Manual page 55

BACK STARLET
01 STARLET
02
BEAVER
03 GRAUBELE
04
MODEL NAME 4
05 MODEL NAME 5
06 MODEL NAME 6
Then switch to the display of the data model saved
on the SD card by touching the IMP.M
middle of the right column:
BACK STARLET
01 STARLET
02 BEAVER
03 GRAUBELE
04 MODEL NAME 4
05 MODEL NAME 5
06 MODEL NAME 6
BACK STARLET
01 E-HELI
02 ALPINA 3001
03 EPSILON
04 RACECOPTER FROM
05 BEAGLE To
06 YES NO
Touch the model to be imported from the SD memory
card, for example:
BACK STARLET
Touch
01 E-HELI
02
ALPINA 3001
03 EPSILON
04
RACECOPTER FROM
05 BEAGLE To
06 YES NO
The color of the field switches from black to blue.
At the same time the display of the model type icon
changes accordingly and on the right near "ORIGIN"
NEXT
appears the number of the memory to import in red
SEL
characters:
NEW
IMP.M
EXP.M
RES
CPY
button in the
Tip
NEXT
SEL
The recall of each model type of the models saved
Touch
NEW on the memory card is performed as described under
"Model type
IMP.M
EXP.M
Touch NO
RES
start page. After tapping on
CPY
NEXT
SEL
NEW
IMP.M
EXP.M
04 RES
CPY
... after a short while the message "Please Wait!" ap-
pears ...
NEXT
SEL
NEW
IMP.M
EXP.M
04 RES
CPY
... while the selected model is imported into the se-
lected mode memory.
BACK STARLET NEXT
01 E-HELI SEL
02 ALPINA 3001 NEW
03 EPSILON IMP.M
04 FROM 02 EXP.M
RACECOPTER
05 BEAGLE To 04 RES
CPY
06 YES NO
display".
to terminate the action and return to the
YES ...
BACK STARLET NEXT
01 SEL
E-HELI
02 ALPINA 3001 NEW
03 EPSILON IMP.M
04 RACECOPTER FROM 02 EXP.M
Touch
04 RES
05 BEAGLE To
06 YES NO CPY
BACK STARLET NEXT
01 E-HELI SEL
02 ALPINA 3001 NEW
03 EPSILON IMP.M
04 RACECOPTER QUELLE 02 EXP.M
PLEASE
05 BEAGLE Ziel 04 RES
WAIT!
06 J N CPY
Once the process is completed, all the warning mes-
sages will disappear, and the display returns to the list
of models and the transmitter:
BACK STARLET
01 STARLET
02 BEAVER
03 GRAUBELE
04
ALPINA 3001
05 MODELLNAME 5
MODELLNAME 6
06
Tips
If a memory specific bound (and at the same time
assigned to the SD card, eventually for safety rea-
sons) model is loaded again on the originally model
memory of the same transmitter, the receiver binding
will always be functional.
If, in contrast, the same model is copied in another
model memory or in a completely different transmit-
ter, the receiver MUST be bound again to the trans-
mitter.
• If a transmitter specific bound (and at the same time
assigned to the SD card, eventually for safety rea-
sons) model is loaded again on another model mem-
ory of the same transmitter, the receiver binding will
always be functional.
If, in contrast, the same model is copied in another
transmitter, the receiver MUST be bound again to the
transmitter.
Base menu - Model selection
NEXT
SEL
NEW
IMP.M
EXP.M
RES
CPY
55