Vario; Transmitter; Receiver - GRAUPNER mz-24 Pro Programming Manual

• automatic sequential
As long as the switches assigned to the line "RE-
PEAT" and "TRIGGER" are switched on, ...
BACK
Telemetry
REPEAT 10s SW 2 TONE AUTO
TRIGGER SW 3

VARIO

NULL

TRANSMITTER

>>

RECEIVER

>>
>> >>
GENERAL MOD ELEC MOD
>> >>
VARIO MOD GPS MOD
ESC MOD >>
... all the announces included in this menu and in
all of its sub-menus, which have been activated,
will be repeated within the interval selected in the
line "REPEAT".
VARIO
When the line "VARIO" is active in the sub-menu
"SENSOR" ( ON ), you can use one of the switches
assigned to this line to retrieve vario-specific voice
triggers such as "slowly ascending/descending"
through the transmitter's headphones independent of
the other voice triggers, i.e., voice triggers triggered
by a change in height.
BACK Telemetry
REPEAT 10s NULL AUTO
tone
TRIGGER NULL VARIO NULL
>> >>
TRANSMITTER RECEIVER
Touch
GENERAL MOD >> ELEC MOD >>
>> >>
VARIO MOD GPS MOD
>>
ESC MOD
The switch assignment, follows the procedure de-
scribed in section Control and switch
TRANSMITTER
After tapping on the desired button ...
BACK
REPEAT
TRIGGER
TRANSMITTER
INC
GENERAL MOD
RES
VARIO MOD
DEC
ESC MOD
... to open the selected sub-menu:
BACK
TX-VOLT
MODELTIME
BATT TIME
TIMER 1
In this sub-menu you can activate and deactivate the
voice triggers available for selection in the related val-
ue fields, for example:
BACK
TX VOLT
MODELTIME
Touch
BATT TIME
INC
TIMER 1
RES
DEC
assignment.
Telemetry
10s NULL tone AUTO
NULL VARIO NULL
>> >> INC
RECEIVER
>> >> RES
ELEC MOD
Touch
DEC
>> GPS MOD >>
>>
Telemetry
TIMER 2
CURR. TIME
Telemetry
TIMER 2
CURR. TIME
RECEIVER
After tapping on the desired button ...
BACK Telemetry
REPEAT 10s NULL tone AUTO
TRIGGER NULL VARIO NULL
>> >>
TRANSMITTER RECEIVER
GENERAL MOD >> >>
ELEC MOD
Touch
>>
VARIO MOD >> GPS MOD
>>
ESC MOD
... to open the selected sub-menu:
BACK
Telemetry
TEMP
STRENGTH
RX VOLT
L-VOLT
In this sub-menu you can activate and deactivate the
voice triggers available for selection in the related val-
ue fields.
"Sensors"
As soon as, after switch on, you receiver system and
the sensors connected to the receiver have been rec-
ognized, specific displays related to the sensors can
be selected and opened by tapping on the
The voice triggers are selected as described above.
Function menu - Telemetry | Voice Trigger
INC
RES
DEC
>> button.
117