Display Page "Travel Setting" - GRAUPNER mz-24 Pro Programming Manual

AILE differentiation
Setting the aileron travel, differentiation and differentiation reduction
This sub-menu is hidden when selecting "1AILE" or
"1AILE1FLAP" in the basic settings of the model mem-
ory.
In the basic transmitter display, use your fi nger or the
provided stylus to touch the gear icon labeled "F":
000%
000:00.0
000 000
mz
0:01:23 000:00.0
Touch
M - 4
000 000
PHASE 1
Soarmaster
BATT TIME 00: 01: 23
000
The display switches to the blue function menu. Touch
the menu item "Aile diff".
BACK BASE FUNCTION
Phase D/R,EXPO THR.CRV Idle LOW
Snap roll Aile diff Wing MIX Flap MIX
Touch
Airbrake TTrainer Logical sw Sequence
Phase-dependent settings
The here mentioned sub-menu offers the possibility
of phase specifi c settings. Recognizable on the top
left side of the display in green color is displayed the
phase name. As standard is displayed the name of the
phase 1, which is indicated by the name "NORMAL"
or "PHASE 1". As soon as you will have defi ned one
or many other phases in the "PHASE" menu, you will
be able to switch among those phases. Activate the
corresponding switch or switches if desired to switch
between the phases.
184 Function menu | Airplane models - Aileron settings
The top of the two following fi gures shows an exam-
ple of the display when setting the minimum "2AILE",
the central fi gure in case of selecting up to "4AILE"
and the bottom fi gure shows the display of differen-
tiation and differentiation reduction while selecting
"4AILE 4FLAPS".
000%
4.2V
RATE A
RATE B
000
SYSTEM
RATE A
Prog.MIX
RATE B
Flap set
V-Tail
Notice
The available setting options depend on the
number of ailerons selected in the basic settings
of the model.
BACK PHASE 1 Aile Diff Sv
NEXT
INC
AILE1 AILE2
100% RES
100%
100% 100% DEC
BACK SERVO
PHASE 1 Aile diff
NEXT
AILE1 AILE3 AILE4 AILE2 INC
100% 000% 000% 100% RES
100% 100% DEC
000% 000%
BACK PHASE 1 Aile diff SERVO
Diff. Red.
AILE1 L+R 000% 000% NEXT
000% 000% INC
AILE2 L+R
FLAP1 L+R 000% 000% RES
DEC
FLAP2 L+R 000% 000%

Display page "Travel setting"

The adjustment range of 100% to both sides allows
you to adjust different defl ection on the right side in-
dependent of the direction of rotation of the aileron
servos in this display page. 100% (travel) corresponds
to normal defl ection, and 0% (travel) corresponds to
the split function.
Notice
At least then, in case of use of the butterfl y sys-
tem of the differentiation reduction function, see
following, a differentiation should not be per-
formed in this display page but, after tapping on the
NEXT
button, in the next display page.
To change a value, touch the corresponding value
fi eld, for example:
BACK PHASE 1 Aile diff
AILE1 AILE2
AILE3 AILE4
Touch
RATE A 100% 000% 000% 100%
RATE B 100% 000% 000% 100%
The color of the fi eld switches from black to blue:
BACK PHASE 1 Aile diff
AILE1 AILE3 AILE4 AILE2
RATE A 100% 000% 000% 100%
RATE B 100% 000% 000% 100%
SERVO
NEXT
INC
RES
DEC
SERVO
NEXT
INC
RES
DEC