Commissioning; Battery Connection; Battery Charging; Transmitter Power Switch - GRAUPNER X-8E Manual

Commissioning

On - Off
Switch
12 / 48

Battery connection

Remove the cover from the bottom of the transmitter and con-
nect the battery, paying attention to the correct polarity. Shut
the cover and ensure it is securely closed.
Set the the battery warning threshold in accordance with the
battery used. (see Chapter "SYS SET")
If a voltage warning is triggered, charge the batteries.

Battery charging

Charge the LiPo batteries in the transmitter through the micro
USB socket using the USB cable provided. For all other battery
types, use an USB connection, e.g. a PC USB port or an USB
net adapter. During the charging process the LED under the dis-
play lights up red. When the battery is full the LED turns off.
Alternatively, you can charge the battery outside the transmitter
with an RC battery charger (not included).

Transmitter power switch

On the top of the transmitter there are two buttons. To turn on
the transmitter with RF off, push the right button for about 2 sec-
onds. When the RF mode is off, a safety feature is activated that
prevents switched-on models from accidentally starting during
programming. Additionally, power consumption is reduced,
significantly conserving battery life.
To turn on the transmitter with RF on, push the left button.
Battery socket
S1008_X-8E_jh_V1