Alarm Logical Objects - Cisco ONS 15600 SDH Troubleshooting Manual

Hide thumbs Also See for Cisco ONS 15600 SDH:
Table of Contents

Advertisement

Chapter 2 Alarm Troubleshooting
Table 2-6
ONS 15600 SDH Alarm and Condition Alphabetical List (continued)
FRCDSWTOPRI (NE-SREF)
FRCDSWTOSEC (EXT-SREF)
FRCDSWTOSEC (NE-SREF)
FRCDSWTOTHIRD (EXT-SREF)
FRCDSWTOTHIRD (NE-SREF)
FREQ-MISMATCH (EQPT)

2.3 Alarm Logical Objects

The CTC alarm profile list organizes all alarms and conditions according to the logical objects they are
raised against. These logical objects represent physical objects such as cards, logical objects such as
circuits, or transport and signal monitoring entities such as the SDH optical overhead bits. One alarm
can appear in multiple entries. It can be raised against multiple objects. For example, the loss of signal
(LOS) alarm can be raised against the optical signal (STM-N) or the building integrated timing supply
(BITS) clock as well as other objects. Therefore, both STMN: LOS and BITS: LOS appear in the list (as
well as the other objects).
Alarm profile list objects are defined in
Alarm logical object names can appear as abbreviated versions of standard terms used in the system and
Note
the documentation. For example, the "STMN" logical object refers to the STM-N signal. Logical object
names or industry-standard terms are used within the entries as appropriate.
Table 2-7
Type
BITS
BPLANE
CAP
ENVALRM
EQPT
EXT-SREF
FAN
GIGE
NE
NE-SREF
PIM
POS
July 2010
MFGMEM (FAN)
MFGMEM (PIM)
MFGMEM (PPM)
MS-AIS (STMN)
MS-DEG (STMN)
SSM-OFF (STMN)
Table
Alarm Logical Object Type Definitions
Description
Building integrated timing supply incoming references (BITS-1, BITS-2).
The backplane.
Customer access panel (CAP).
An environmental alarm port.
A card, its physical objects, and logical objects as they are located in any of the eight
noncommon card slots. The EQPT object is used for alarms that refer to the card
itself and all other objects on the card including ports, lines, high-order paths
(HOPs), and low-order paths (LOPs).
BITS outgoing references (SYNC-BITS1, SYNC-BITS2).
Fan-tray assembly.
Gigabit Ethernet.
The entire network element.
The timing status of the NE.
Pluggable input-output module (or 4PIO) for the ASAP card.
Packet over SDH (virtual entity).
WTR (STMN)
WTR (VCMON-HP)
WVL-OUT-OF-LOCK (STMN)
XCMTX (NE)
2-7.
Cisco ONS 15600 SDH Troubleshooting Guide, R8.0
2.3 Alarm Logical Objects
2-7

Advertisement

Table of Contents
loading

Table of Contents