2.6.136 MANSWTOPRI
The Manual Synchronization Switch to Internal Clock condition occurs when the NE (node) timing
source is manually switched to an internal timing source.
MANSWTOINT is an informational condition and does not require troubleshooting.
Note
2.6.136 MANSWTOPRI
The Manual Synchronization Switch to Primary Reference condition occurs when the NE (node) timing
source is manually switched to the primary source.
Note
MANSWTOPRI is an informational condition and does not require troubleshooting.
2.6.137 MANSWTOSEC
The Manual Synchronization Switch to Second Reference condition occurs when the NE (node) timing
source is manually switched to a second source.
MANSWTOSEC is an informational condition and does not require troubleshooting.
Note
2.6.138 MANSWTOTHIRD
The Manual Synchronization Switch to Third Reference condition occurs when the NE (node) timing
source is manually switched to a third source.
MANSWTOTHIRD is an informational condition and does not require troubleshooting.
Note
2.6.139 MANUAL-REQ-RING
The Manual Switch Request on Ring condition occurs when a user initiates a MANUAL RING command
on a MS-SPRing ring to switch from working to protect. This condition is visible on the network view
Alarms, Conditions, and History tabs and is accompanied by WKSWPR. The port where the MANUAL
RING command originated is marked with an "M" on the network view detailed circuit map.
Cisco ONS 15600 SDH Troubleshooting Guide, R8.0
2-92
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Logical Objects: EXT-SREF, NE-SREF
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Logical Objects: EXT-SREF, NE-SREF
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Logical Objects: EXT-SREF, NE-SREF
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Logical Object: STMN
Chapter 2 Alarm Troubleshooting
July 2010