Not-Authenticated; Non-Cisco-Ppm; Clear The Non-Cisco-Ppm Condition; Open-Slot - Cisco ONS 15600 SDH Troubleshooting Manual

Chapter 2 Alarm Troubleshooting
MS-SQUELCH-HP is an informational condition.
Note

2.6.155 NOT-AUTHENTICATED

The NOT-AUTHENTICATED alarm is raised by CTC (not by the NE) when it fails to log into a node.
This alarm only displays in CTC where the login failure occurred. This alarm differs from the
"INTRUSION-PSWD" alarm on page 2-75
login failures threshold.
NOT-AUTHENTICATED is an informational alarm and is resolved when CTC successfully logs into the
Note
node.

2.6.156 NON-CISCO-PPM

The Non-Cisco PPM Inserted condition occurs when a PPM that is plugged into a card's port fails the
security code check. The check fails when the PPM used is not a Cisco PPM.

Clear the NON-CISCO-PPM Condition

Step 1 Obtain the correct Cisco PPM and replace the existing PPM with the new one.
Step 2 If the condition does not clear, log into the Technical Support Website at
http://www.cisco.com/techsupport for more information or call Cisco TAC (1 800 553-2447).

2.6.157 OPEN-SLOT

The OPEN-SLOT alarm indicates that one of the I/O slots (Slot 1 through 4 and 11 through 14) does not
contain a traffic card or filler card.

Clear the OPEN-SLOT Alarm

Insert a filler card or STM-N card into the empty slot.
Step 1
July 2010
Default Severity: Minor (MN), Non-Service-Affecting (NSA)
Logical Object: SYSTEM
Default Severity: Minor (MN), Non-Service-Affecting (NSA)
Logical Object: PPM
Default Severity: Minor (MN), Non-Service-Affecting (NSA)
Logical Object: EQPT
in that INTRUSION-PSWD occurs when a user exceeds the
Cisco ONS 15600 SDH Troubleshooting Guide, R8.0
2.6.155 NOT-AUTHENTICATED
2-101