Ethernet-Port-Switch; Exercising-Ring; Firewall-Dis; Intrusion - Cisco ONS 15600 SDH Troubleshooting Manual

Hide thumbs Also See for Cisco ONS 15600 SDH:
Table of Contents

Advertisement

Chapter 3 Transient Conditions
This condition can be due to server issues, network issues, or human error (pointing to a file that does
not exist, wrong file name, etc.). Retrying the database restore with the correct file will usually succeed.
If the network issue persists, you must contact network lab support. If the condition is caused by a
network element (NE) failure, contact Cisco TAC for assistance. See the
Submitting a Service Request" section on page xxxii

3.3.11 ETHERNET-PORT-SWITCH

The TSC Switched to Alternate Ethernet Port (ETHERNET-PORT-SWITCH) condition occurs when an
alternate Ethernet port becomes active. If it occurs after startup, it means that the backplane Ethernet
connection that was active is not active anymore. Onsite technical support must check the connection
between the ONS 15600 SDH and the router or switch.

3.3.12 EXERCISING-RING

The Exercising Ring Successfully (EXERCISING-RING) condition occurs whenever you issue an
Exercise-Ring command from CTC or Transaction Language 1 (TL1). This condition indicates that a
command is being executed. You must issue another command to clear the exercise and the condition.

3.3.13 FIREWALL-DIS

The Firewall Has Been Disabled (FIREWALL-DIS) condition occurs when you provision the firewall to
Disabled.
This transient condition does not result in a standing condition.

3.3.14 INTRUSION

The Invalid Login Username (INTRUSION) condition occurs when you attempt to log in with an invalid
user ID.
This transient condition does not result in a standing condition.

3.3.15 LOGIN-FAIL-LOCKOUT

The Invalid Login–Locked Out (LOGIN-FAIL-LOCKOUT) condition occurs when you attempt to log
into a locked account.
This transient condition does not result in a standing condition.

3.3.16 LOGIN-FAIL-ONALRDY

The Security: Invalid Login–Already Logged On (LOGIN-FAIL-ONALRDY) condition occurs when
you attempt to log into a node where you already have an existing session and a Single-User-Per-Node
(SUPN) policy exists.
This transient condition does not result in a standing condition.
July 2010
3.3.11 ETHERNET-PORT-SWITCH
"Obtaining Documentation and
as needed.
Cisco ONS 15600 SDH Troubleshooting Guide, R8.0
3-5

Advertisement

Table of Contents
loading

Table of Contents