8 Fully-closed Loop Control
8.1.3 Serial Converter Unit
8.1.3
Serial Converter Unit
This section provides the specification of the serial converter unit.
(1) Model: JZDP-D00 -
Characteristics and Specifications
Electrical
Characteristics
Mechanical
Characteristics
Environmental
Conditions
∗
Input a value within the specified range. Otherwise, incorrect position information is output, and the device may be
damaged.
8-4
-E
Items
Power Supply Voltage
Current Consumption
Signal Resolution
Max. Response Frequency
∗
Analog Input Signals
(cos, sin, Ref)
Output Signal
Output Method
Output Circuit
Approx. Mass
Vibration Resistance
Shock Resistance
Surrounding air Temperature
Storage Temperature
Humidity
Altitude
Specifications
+5.0 V±5%, ripple content 5% max.
120 mA Typ. 350 mA max.
1/256 pitch (1 cycle) of input 2-phase sine wave pitch
250 kHz
Differential input amplitude: 0.4 V to 1.2 V
Input signal level: 1.5 V to 3.5 V
Position data, alarms
Serial data communications
Balanced type transceiver (SN75LBC176 or the equivalent),
internal terminating resistor: 120 Ω
150 g
2
98 m/s
max. (10 to 2500 Hz) in three directions
2
980 m/s
, (11 ms) two times in three directions
0°C to 55°C
-20°C to +80°C
20% to 90%RH (without condensation)
1000 m max.