Σ-V Large-Capacity Servopacks And Converters; Servopacks; Servopack Part Names - YASKAWA SGDV series User Manual

1 Outline
1.1
Σ-V Large-Capacity SERVOPACKs and Converters
The Σ-V large-capacity SERVOPACKs and converters are designed for applications that require frequent
high-speed, high-precision positioning. The SERVOPACKs and converters make the most of machine perfor-
mance in the shortest time possible, therefore contributing to improving productivity.
1.2

SERVOPACKs

The command option attachable type SERVOPACK is used with command option modules. For reference
methods, I/O signals, and other operations, refer to the manual for the command option module that is con-
nected.
1.3

SERVOPACK Part Names

This section describes the part names of SERVOPACKs.
Use a SERVOPACK together with a converter. For details, refer to 1.10 Combinations of Servomotors, SER-
VOPACKs, and Converters.
Note: For the purpose of this description, the SERVOPACK is shown with the front cover removed. Always keep the front
cover attached when using the SERVOPACK.
M-II
No.
DIP switch (S3)
Rotary switch (S2)
Power LED indicator
(POWER)
CN5 Analog monitor
connector
Panel display
1-2
With plastic cover open
Name Description
Refer to the manual of the connected command option module.
Indicates that the control power is being supplied
(green).
Used to monitor motor speed, torque reference,
and other values through a special cable (option).
Indicates the servo status with a seven-segment
LED display.
Reference
–
5.1.3 Monitoring Operation
during Adjustment
2.1.1 Status Display