YASKAWA SGDV series User Manual page 45

Step Display after Operation
9
(2) How to Select Functions Using Parameters
The following example shows how to set the function section for insufficient voltage of the application func-
tion select switch 8 (Pn008) to 1
Step Display after Operation
1
2
3
4
5
6
7
8
9
Keys
Press the
"detects warning and limits torque by host controller."
Keys
Press the
eters and monitor displays.
Press the
"Un."
Press the
Press the
the column on the right of "Pn."
Press the
Press the
Press the
"Pn008.1."
Press the
to "1."
Press the
2.4 Parameters (Pn
Operation
Key to write the settings.
Operation
Key to select the main menu of param-
or Key to move the cursor to
or Key to change "Un" to "Pn."
Key three times to move the cursor to
Key to display "Pn008."
Key to move the cursor to "Pn008.0."
Key once to move the cursor to
Key to change the setting of "Pn008.1"
Key to write the settings.
)
(cont'd)
2
2-7