Chapter 2 Panel Display And Operation Of Digital Operator; Panel Display; Status Display; Alarm And Warning Display - YASKAWA SGDV series User Manual

2 Panel Display and Operation of Digital Operator

2.1.1 Status Display

2.1

Panel Display

The servo drive status can be checked on the panel display of the SERVOPACK.
Also, if an alarm or warning occurs, its alarm or warning number is displayed.
2.1.1

Status Display

The display shows the following status.
2.1.2

Alarm and Warning Display

If an alarm or warning occurs, the display will change in the following order.
Example: Alarm A.E60
Status
Display
2.1.3

Hard Wire Base Block Display

If a hard wire base block (HWBB) occurs, the display will change in the following order.
Status
Display
2.1.4

Overtravel Display

If overtravelling occurs, the display will change in the following order.
Overtravel at forward rotation (P-OT)
1
Overtravel at reverse rotation (N-OT)
2
2-2
Display
Rotation Detection (/TGON)
Lights if motor speed exceeds the value set in Pn502. (Factory setting: 20 min
Baseblock
Lights for baseblock (Servomotor power OFF).
Reference Input
Lights when a reference is being input.
Command Option Module Communications Status Display
Lights when communications with the command option module are normal.
Unlit Unlit
Unlit Unlit
Current
status
Current
status
Meaning
Unlit
Unlit
Overtravel at forward/reverse rotation
3
Current
status
-1
)
Unlit Unlit
MECHA
MECHA
Unlit
MECHA