Software Version Display (Fn012) - YASKAWA SGDV series User Manual

6 Utility Functions (Fn

6.14 Software Version Display (Fn012)

Select Fn012 to check the SERVOPACK and encoder software version numbers.
(1) Preparation
There are no tasks that must be performed before the execution.
(2) Operating Procedure
Use the following procedure.
Step
1
2
3
4
5
6
7
6-24
)
Display after Operation
− F U N C T I O N −
B B
F n 0 1 1 : M o t o r I n f o
F n 0 1 2 : S o f t V e r
F n 0 1 3 : M t u r n L m S e t
F n 0 1 4 : O p t I n i t
− S o f t V e r −
B B
D R I V E R
V e r . = 0 0 0 1
E N C O D E R
V e r . = 0 0 0 3
− F U N C T I O N −
B B
F n 0 1 1 : M o t o r I n f o
F n 0 1 2 : S o f t V e r
F n 0 1 3 : M t u r n L m S e t
F n 0 1 4 : O p t I n i t
Keys
Press the
utility function.
Use the or
select Fn012.
Press the Key. The display changes to the Fn012
execution display.
The software versions of the SERVOPACK and the
connected encoder will appear.
Note: If the servomotor is not connected, "Not con-
nect" is displayed.
Press the
external encoder will be displayed.
Note: If an external encoder is not connected, "Not
connect" will be displayed.
Press the
command option module will be displayed.
Note: If a command option module is not connected,
"Not connect" will be displayed.
Press the Key. The software version of the safety
option module will be displayed.
Note: If a safety option module is not connected,
"Not connect" will be displayed.
Press the
feedback option module will be displayed.
Note: If a feedback option module is not connected,
"Not connect" will be displayed.
Press the
menu of the utility function.
Operation
Key to view the main menu for the
Key to move through the list and
Key. The software version of the
Key. The software version of the
Key. The software version of the
Key. The display returns to the main