3.2
Connecting the Converter to the SERVOPACK
3.2.1 Connecting the Connectors
Connect CN901 and CN103 on the SERVOPACK and converter as shown in the following figure.
Converter
Cable Name
IO signal connection cable JZSP-CVI02-A4-E
24-VDC control power
supply cable
3.2.2 Interconnecting Terminals
Use the busbars that are provided with the converter to connect the P and N terminals between the SERVO-
PACK and the converter.
The busbars are different for different converter models.
SERVOPACK
CN103: Control power supply input connector
24-VDC control power supply cable
I/O signal connection cable
CN901: I/O signal connector between the SERVOPACK and converter
Cable Model
Cable Length
0.4 m
JZSP-CVG00-A4-E
0.4 m
3.2 Connecting the Converter to the SERVOPACK
M-II
Description
This cable connects the CN901 connectors on
the SERVOPACK and converter.
This cable connects the CN103(CN104) con-
nectors on the SERVOPACK and converter.
3
3-21