YASKAWA SGDV series User Manual page 350

Parameter
Size
No.
2 Output Signal Inverse Setting
4th 3rd 2nd 1st
digit digit digit digit
n.
Pn512
Pn513 2 Reserved (Do not change.)
2 Input Signal Selection 6
4th 3rd 2nd 1st
digit digit digit digit
n.
Pn515
Pn517
2 Reserved (Do not change.)
Excessive Error Level between Servomo-
Pn51B
4
tor and Load Positions
Pn51E 2 Excessive Position Error Warning Level
Setting
Name
Range
0000 to 0111
Output Signal Inversion for CN1-25 or -26 Terminal
0 Does not inverse outputs.
1 Inverses outputs.
Output Signal Inversion for CN1-27 or -28 Terminal
0 Does not inverse outputs.
1 Inverses outputs.
Output Signal Inversion for CN1-29 or -30 Terminal
0 Does not inverse outputs.
1 Inverses outputs.
Reserved (Do not change.)
0000 to
FFFF
Reserved (Do not change.)
Reserved (Do not change.)
Dynamic Brake Answer signal 1 Input Signal Mapping (/DBANS1)
0 Detects dynamic brake (DB) contactor errors when the input signal of CN1-40 is ON (closed) while
the DB is applied.
1 Detects DB contactor errors when the input signal of CN1-41 is ON (closed) while the DB is applied.
2 Detects DB contactor errors when the input signal of CN1-42 is ON (closed) while the DB is applied.
3 Detects DB contactor errors when the input signal of CN1-43 is ON (closed) while the DB is applied.
4 Detects DB contactor errors when the input signal of CN1-44 is ON (closed) while the DB is applied.
5 Detects DB contactor errors when the input signal of CN1-45 is ON (closed) while the DB is applied.
6 Detects DB contactor errors when the input signal of CN1-46 is ON (closed) while the DB is applied.
7, 8 Disables DB contactor error detection of DB answer signal 1.
9 Detects DB contactor errors when the input signal of CN1-40 is OFF (open) while the DB is applied.
A Detects DB contactor errors when the input signal of CN1-41 is OFF (open) while the DB is applied.
B Detects DB contactor errors when the input signal of CN1-42 is OFF (open) while the DB is applied.
C Detects DB contactor errors when the input signal of CN1-43 is OFF (open) while the DB is applied.
D Detects DB contactor errors when the input signal of CN1-44 is OFF (open) while the DB is applied.
E Detects DB contactor errors when the input signal of CN1-45 is OFF (open) while the DB is applied.
F Detects DB contactor errors when the input signal of CN1-46 is OFF (open) while the DB is applied.
Reserved (Do not change.)
0 to
1073741824
10 to 100
Factory
Units
Setting
−
0000
− − 0000
− 8888
– – 0000
1
reference 1000
unit
1% 100
10.1 List of Parameters
(cont'd)
When Classi- Reference
Enabled fication Section
After restart Setup 3.4.2
− − −
After restart Setup −
Reference
Section
3.9.4
– – –
Immediately Setup 8.3.6
Immediately Setup 9.2.1
10
10-21