YASKAWA SGDV series User Manual page 31

Input
Output
Safety Function
Standards
(Application
pending)
Optional Module
∗1. Speed regulation by load regulation is defined as follows:
No-load motor speed
Speed regulation =
∗2. For information on functions, refer to the manual of the connected command option module.
∗3. Set Pn001 to n.
2 if you do not use the dynamic brake.
∗4. Refer to 3.9 Selecting and Connecting a Dynamic Brake Unit for details on dynamic brake units.
∗5. Refer to 3.8 Selecting and Connecting a Regenerative Resistor Unit for details on regenerative resistor unit.
∗6. Implement risk assessment and confirm that the safety requirements of the machine have been met.
/HWBB1, /HWBB2: Baseblock signal for power module
EDM1: Monitoring status of internal safety circuit (fixed output)
*6
EN 954 Category 3, IEC 61508 SIL2
Fully-closed module, safety module, command option module
- Total load motor speed
Rated motor speed
1.5 Ratings and Specifications
Rotation
×
100%
(cont'd)
1
1-9