Download  Print this page

Airport Information; Navaid Information; Screen 40: Map Mode Airport Info Screen; Screen 40a: Map Mode Navaid Information Screen - Honeywell KMD-150 Pilot's Manual

Multifunction display/gps.
Hide thumbs

Advertisement

Map Mode Screens

AIRPORT INFORMATION

As explained previously,
you can access this Screen
from
Screen 39
by placing
the joystick pointer over an
airport icon and pressing
Key 4, MORE INFO. All
the information given here
is derived from the built-in
Jeppesen
database.
Runway
surfaces
are
shown as an H for hard and
an S for soft. Lighting is
shown as an L for lit and a
U for unlit.
Screen 40: Map Mode Airport Info
Screen
To obtain DIRECT TO for
the chosen airport all you have to do is press Key 5, labeled DIRECT
TO. To return to the Map of
Screen 39
you should press Key 1, PREV
PAGE. Alternatively, the unit gives you 30 seconds to read what you
require from the Info Screen and then automatically returns to
Screen
39.
Pressing Key 5, DIRECT TO, in Map Mode when the joystick is not
active, can also access this Screen. Allowing you to call up the item of
interest from the airports database as if you were selecting it for a
DIRECT TO. If this Screen were entered this way Key 4, VIEW AREA,
would be present allowing you to not only view the appropriate airport
data but also look at its position on the map.

NAVAID INFORMATION

As explained previously,
you can access this Screen
from
Screen 39
by placing
the joystick pointer over a
VOR or NDB icon and
pressing Key 4, MORE
INFO. Full details of the
Navaid are listed, type, fre-
quency and ident. The
fourth line in the box is a
visual representation of the
Morse ident and if you are
one of those pilots whose
knowledge of Morse is less
Screen 40A: Map Mode Navaid
than perfect, all you have to
Information Screen
62
Rev 1 Mar/2000
KMD 150 Pilot's Guide

Advertisement

   Related Manuals for Honeywell KMD-150

   Related Content for Honeywell KMD-150

Comments to this Manuals

Symbols: 0
Latest comments: