Creating A New Job - Leica TPS1200 series Technical Reference Manual

5.3
Access
Create job step-by-step
Manage...\Jobs

Creating a New Job

Refer to "5.2 Accessing Job Management" to access MANAGE Jobs (Device).
The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step Description
1. In MANAGE Jobs (Device) highlight a job. The settings of this job
are applied to the new job.
2. NEW (F2) to access MANAGE New Job.
STORE (F1)
To store the settings and to return to the screen
from where MANAGE New Job was accessed.
PAGE (F6)
To change to another page on this screen.
TPS1200
Refer to
chapter
5.2
71