Xerox DocuColor 2240 Service Manual page 1485

Figure 8 Preparing Tray Module Cover
6. Reinstall the Tray Module Rear Cover.
Installing the One-Touch Panel
1. Remove the Control Panel (Figure
3
Remove Left Panel
(3 snap-hooks)
2
Flip PWB assy. Disconnect connec-
tors if required for clearance
Figure 9 Removing the Control Panel
2. Remove the Left Panel. Replace with the One-Touch Panel
Installation
Fax Kit Installation
Remove the Blind Covers (2)
9).
1
Remove screws (5)
(Figure 10).
Figure 10 Installing the One-Touch Panel
3. Connect the One-Touch Panel
2
Connect to CN5
on Control Panel
PWB.
1
Route cable as
shown.
Figure 11 Connecting the One-Touch Panel
4. Reinstall the Control Panel.
Completing the Installation
1. Install the Fax cables (Figure
09/03
9-10
Snap One-Touch Panel
into place. Route cable as
shown.
(Figure 11). Route harness as shown.
12).
DC 3535/2240/1632, WC M24
One-Touch
Panel
Initial issue