Appendix D - CLI Reference
288
Where:
ip_address
Use the
save config
set service
Enables or disables the service that sends the system log to a host running
syslogd. See your host's syslogd documentation for instructions. Display the man
page for syslog.conf on your host for more information.
Syntax
set service {on | off}
Where:
on
off
Use the save system config command to save the changes across system
reboots.
show host
Displays the IP address of the host that receives the system log. This host must
have the syslogd configured correctly. See your host's syslogd documentation for
instructions. Display the man page for syslog.conf on your host for more
information.
Syntax
show host
The command displays information similar to the following:
system logging syslog> show host
host
VMA-series Memory Array Installation and Service Guide
Specifies the IP address of the host to which the
system log messages will be sent.
command to save the changes across system reboots.
Starts the service that sends the system log messages to
the host running syslogd.
Stops the service that sends the system log messages to
the host running syslogd.
192.37.87.4
HP-AM456-9002A Rev 01