Category Context Commands
HP-AM456-9002A Rev 01
Figure D.21 System>Logging>In-Memory>Category Context Level
The table below describes the commands available at the Category context
sublevel of the CLI. Access the Category context sublevel through the In-memory
context level. See
In-memory Context Commands
Table D.24 Category Context Commands
Command
Sets the message logging level of the specified message
set level
category.
Displays the message logging level of the specified
show level
message category.
set level
Sets the logging level of the specified message category stored in the system log
of the Memory Array. Setting the category logging level overrides the default level
set in the In-memory context command. The logging level can be set to:
•
DEBUG
•
INFO
•
WARN
•
ERROR
•
FATAL
Syntax
set level {default | fatal | error | warn | info | debug}
VMA-series Memory Array Installation and Service Guide
Category Context Commands
on page 281.
Description
285