Table of Contents
Advertisement
Chapter 9 - Violin Utilities
162
ready
formatting
format_done
paused
link
lid_ajar
raid_rebuild
write_buffer
linkwidth
maxlinkwidth
cur_payload
max_payload
cur_read_req
dma_active
io_pend
vupdate_tz
The
utility updates the time zone in which the Memory Array is
vupdate_tz
located, and displays the time zone offset in seconds.
This utility is set to run as a cron job once a day and on boot up of the Memory
Array.
Syntax
vupdate_tz
VMA-series Memory Array Installation and Service Guide
Indicates whether the data plane is online and
ready or offline.
Indicates if formatting of the VIMMs is in
progress or not. This is only applicable to flash
VIMM systems.
Indicates the progress percentage done
during formatting of the VIMMs.
Indicates the pause interval for I/Os.
Indicates whether the PCIe connection is
online or offline.
Indicates whether the lid is closed or not.
Indicates the status of a RAID group rebuild.
Indicates whether flash write buffering is
enabled or disabled.
Indicates how many active PCIe lanes are
available.
Indicates the maximum number of active PCIe
lanes.
Indicates the size of the PCIe payload.
Indicates the maximum size of the PCIe
payload.
Indicates the size of the PCIe read requests.
Indicates the number of 4kB DMA descriptors
actively being processed by Memory Array
hardware.
Indicates the number of I/O requests in the
queue for a Memory Array.
A single I/O request may involve more than
one 4kB DMA descriptor.
HP-AM456-9002A Rev 01
Advertisement
Table of Contents
