Table of Contents
Advertisement
RAID Context Commands
HP-AM456-9002A Rev 01
Figure D.12 RAID Context Level
The table below describes the commands available at the RAID context sublevel
of the CLI.
Table D.14 RAID Context Commands
Command
context group
show spare-ids
context group
Moves into the context level for the specified RAID group.
Syntax
context group <n>
Where:
Specifies the RAID group. Valid values are in the range of 0-
n
15, inclusively.
The system prompt changes to the following:
raid group n>
Example
To move into the context level for RAID group 5, at the RAID context prompt,
type:
context group 5
VMA-series Memory Array Installation and Service Guide
Description
Moves the user into the context level for the
specified RAID group. See
Commands
on page 253.
Displays the IDs of the spare VIMMs in a system.
RAID Context Commands
RAID Group Context
251
Advertisement
Table of Contents
