Table of Contents
Advertisement
HP-AM456-9002A Rev 01
From the CLI prompt, type:
1.
show chassis controller ethernet 0
Log into the host computer and type:
2.
vinfo
To add the Memory Array's MAC address to your DHCP server, consult your
DHCP server documentation.
Clearing Provisioned IP Information
Provisioned IP address information can be cleared at any time.
Log into the CLI via a serial connection or the Ethernet interface (see
1.
Connecting to the CLI
Ethernet 0
Navigate to the
2.
context chassis controller ethernet 0
Ethernet 0
At the
context prompt, type:
3.
clear ip-address
The command displays information similar to the following:
chassis controller ethernet 0> clear ip-address
chassis controller ethernet 0> show
dhcp
ip-address
netmask
gateway
mac-address
dns-config
dns-nameserver
dns-search
Clearing Provisioned DNS Information
Clear provisioned DNS name server and DNS search domain information.
Log into the CLI via a serial connection or the Ethernet interface (see
1.
Connecting to the CLI
Ethernet 0
Navigate to the
2.
context chassis controller ethernet 0
VMA-series Memory Array Installation and Service Guide
Displaying and Setting System Information
on page 76).
context level. At the root prompt, type:
enabled
10.10.0.126
255.255.255.0
10.10.0.1
00:1B:97:00:00:06
automatic
10.10.0.2
violintech.net
on page 76).
context level. At the root prompt, type:
89
Advertisement
Table of Contents
