system> restore config factory
Running this command requires a non service-affecting software reboot.
All OAM-CLI sessions will be terminated.
Would you like to apply the changes (Y/N)?
HP-AM456-9002A Rev 01
The command displays information similar to the following:.
system> save config
Config operation succeeded.
Validity check succeeded.
restore config
Restores the admin login password and system log service configuration
changes back to the factory default settings. Requires a software reboot.
Syntax
restore config factory
The command displays information similar to the following:.
set led-test
Starts a functional test of the system LEDs.
Syntax
set led-test start
Example
To start a functional test of the system LEDs, at the System context prompt, type:
set led-test start
The command displays information similar to the following:.
system> set led-test start
led-test
VMA-series Memory Array Installation and Service Guide
start
System Context Commands
265