Table of Contents
Advertisement
Appendix D - CLI Reference
262
Syntax
context version
The system prompt changes to the following:
system version>
save log
Saves the system log to a remote host using either TFTP or SCP.
Syntax
save log {<user>@scp | tftp}://<
Where:
Specifies to use SCP and the user name to log onto the
@scp
user
host when using SCP.
Specifies to use TFTP.
tftp
Specifies the host name to copy the system log to.
hostname
When using SCP, you will be prompted for the user's password before the copy
process starts.
set admin
Changes the default password for the admin login that is accessed from the
System context level. The admin password must meet the following
requirements.
•
Have a length between 6-12 alphanumeric characters. If six characters are
used, then you must mix upper/lower case letters with numbers or
punctuation.
•
Be a combination of upper and lower case letters and numbers.
•
Cannot be similar to a previous password.
•
Cannot be a palindrome.
If you specify an unacceptable password, you will get a message that the
too simple
password is
lower case or all upper case characters. Essentially, the longer the password,
the less complicated it needs to be.
VMA-series Memory Array Installation and Service Guide
. By increasing the length of the password, you can use all
>/system.log
hostname
HP-AM456-9002A Rev 01
Advertisement
Table of Contents
