Table of Contents
Advertisement
Installing Windows Drivers
HP-AM456-9002A Rev 01
DiskPart successfully changed the SAN policy for the current
operation system.
DISKPART> exit
The Windows Storport driver enables a direct-attached PCIe connection
between a Memory Array and a Windows host machine.
The driver supports four direct-attached hosts running the following versions of
the Windows operating system:
•
Windows 7 x64
•
Windows 2008 R2 Server (all editions) x64
•
Windows 2008 SP2 Server (all editions) x86 and x64
•
Windows 2003 R2 SP2, x86 and x64
For Windows Server 2008 R2, this Storport driver is WHQL certified.
The procedures and examples provided in this chapter were created
Note:
using a Windows Server 2008 host computer. If you are using a different version
of Windows, your installation procedure may be different.
This section contains the following topics:
•
Installing the Windows Drivers
•
Manually Installing the Windows Drivers
•
Removing the Windows Drivers
Installing the Windows Drivers
To install the Windows driver:
Log into the host as
1.
Download the Windows driver zip file
2.
from the HP Support page.
Extract the contents of the zipped file to a suitable location on the host.
3.
Run
from the
4.
setup.exe
VMA-series Memory Array Installation and Service Guide
on page 137
on page 141
on page 143
.
administrator
(driver-storport-Dx.x.x.zip
driver-storport-xxx
Installing Windows Drivers
)
folder.
137
Advertisement
Table of Contents
