Table of Contents
Advertisement
Chapter 5 - Operating the System via the CLI
Connecting to the CLI
**************************************************************************
*
*
*
Operations, Administration & Maintenance - Command Line Interface
*
*
Copyright (c) 2006-2010, Violin Memory, Inc.
*
*
*
*
*
*
**************************************************************************
You are at the root node.
>
76
Connect to the Memory Array's CLI via SSH or Telnet on the host computer over
the Ethernet interface.
You can also log into the system via the serial port. See
the Serial Interface
To connect to the Memory Array from a Windows machine, see
Windows host computer
The default command line editor for the admin user is
Note:
change the default editor to
Connecting via SSH
Connect to the CLI via SSH through your host computer.
On a Linux host, use your preferred command shell. On a Windows host, use a
GUI application, such as PuTTY, to SSH to the Memory Array.
The following is an example of what you will see after successfully connecting to
the CLI.
OAM-CLI
Date
S/W Build Info:
swbuild.violintech.net by user common
Release = Release 3.4
Connecting via Telnet
Connect to the CLI via a Telnet session on your host computer.
VMA-series Memory Array Installation and Service Guide
on page 59 for instructions.
on page 59.
vi
, see
Setting the Command Line Editor
All Rights Reserved.
17:15:13
Logging into the CLI via
Logging in via a
Emacs
. You can
on page 80.
*
*
*
*
*
*
*
*
*
*
*
HP-AM456-9002A Rev 01
Advertisement
Table of Contents
