Table of Contents
Advertisement
Chapter 7 - Linux Drivers
126
At the system prompt, navigate to the following directory:
3.
cd /tmp/vtms-linux-driver-<release>/<kernel_version>/
<architecture_type>
Where:
<release>
<kernel_version>
<architecture_type>
Load the Linux driver; at the system prompt, type:
4.
./load_strad.sh
At any point, if you decide to install the Linux driver in
5.
system prompt, type:
cd /tmp/vtms-linux-driver-<release>
make install
depmod
Where:
<release>
Loading Linux Drivers as Modules
To load the Linux drivers as modules:
Power up the Memory Array and verify the PCIe connectivity between the
1.
Memory Arrayand the host computer before installing and loading the Linux
driver onto the host computer.
Log into the Linux host as
2.
Open a terminal window.
3.
(Optional) To update the dependency mappings of newly installed modules,
4.
at the system prompt, type:
depmod
You may need to run
VMA-series Memory Array Installation and Service Guide
Indicates the release number, such as
D4.5.4.1.
Indicates the kernel version, such as
.
42.ELsmp
Indicates the architecture type of the host
computer, such as
Indicates the release number, such as
.
root
for modprobe to detect the new module.
depmod
2.6.9-
.
x86_64
at the
/lib/modules
4.5.4.1
HP-AM456-9002A Rev 01
.
Advertisement
Table of Contents
